You Are Here:HOME > products > Parts > Cooper Bushings and Bushing Wells > -- > --
Cooper 200 A, 35 kV Class Tri-Clamp Bushing Well with Fixed or Removable Stud BW150F
share

Cooper 200 A, 35 kV Class Tri-Clamp Bushing Well with Fixed or Removable Stud BW150F

  • Price:
  • Conference call
  • Style:
  • Parts
  • Series:
  • --
  • Brand:
  • Cooper Bushings and Bushing Wells
  • Availability:
  • In Stock
QTY:

Description
Contact
Related

200 A, 35 kV Class Tri-Clamp Bushing Well with Fixed or Removable Stud
The Cooper Power Systems 200 A, 35 kV class Tri-Clamp Bushing Well meets the full requirements of the latest revision of the IEEE Standard 386™ – Separable Insulated Connector Systems. It is designed for the termination of primary winding leads at the front plate of fluid-filled apparatus rated at either 8.3/14.4 kV, 15.2/26.3 kV, 16.2/28.0 kV (Canadian Applications) or 21.1/35 kV. The Tri-Clamp Bushing Well is externally clamped for sidewall mounting on single- or three-phase transformers filled with transformer oils or an approved equivalent bio-based fluid.
The Tri-Clamp Bushing Wells are molded with DuPont high performance plastics. These engineered plastics fulfill the required application needs for temperature stability, strength, toughness, low moisture absorption and retention of viable mechanical and electrical properties in humid high temperature environments. The gasket surfaces provide controlled compression and containment of the highly resilient Buna-N rubber gasket.

Catalog Number BW150F, BW150R, 2638640C01, 2639081B018
Standard Coltage Class: 35 kV
Maximum Rating Phase-to-ground: 21.1 kV
AC 60 Hz 1 minute wthstand: 50 kV
DC 15 Minute Withstand: 103 kV
BIL and Full Wave Crest: 150 kV
Minimum corona Voltage Level: 26 kV
Features
Available to fit a 2.56 inch (65 mm) mounting hole and mates with all bushing inserts meeting applicable IEEE® Standards.
Knurled copper stud with rolled threads provides excellent conductivity and strength. 
A removable stud option is available. 
Easy field replacement of the bushing stud with a standard 5/8" socket wrench in the event of damage or breakage in the field. 
A 7/64" hex has been provided in the portion of the stud which mates into the bushing insert. 
Should breakage occur here, this feature allows for easy stud removal from the insert.
Molded-in semi-conductive collar
No additional clamps required
Bail tabs molded into tri-clamp body
Corrosion problems eliminated, no need for metal clamps
  • Products: *
  • Your Email: *
  • Your Message: *
  • Note: HTML is not translated!
  • Code: *

Transformer

Parts

Voltage Regulator

  • abb Transformer
Please Complete the short form below and a A&S sales representatives will contact you shortly. Note: Fields labeled with a * are required.
* Product:
* First Name:
* Last Name:
* Company:
  Phone:
   Fax:
*  Email:
*  Inquiry / Comments
*  Code
 
page run: 1382 ms